محاسبه و اعتبارسنجی فرکانس طبیعی پیچشی برای مجموعه های توربوماشین

The Calculation And Verification Of Torsional Natural Frequencies For Turbomachinery Equipment Strings

 

محاسبه و اعتبارسنجی فرکانس طبیعی پیچشی برای مجموعه های توربوماشین

در این مقاله تکنیک های تحلیلی که برای طراحی توربوماشین ها استفاده می گردند، از نقطه نظر دینامیک پیچشی بحث می شوند. همچنین تمرکز بر روی هر دو مورد فرکانس طبیعی پیچشی و منابع بالقوه تحریک خواهد بود. سه مورد که در آنها مودهای فرکانس طبیعی توسط کامپیوتر و از طریق تحلیل بدست آمده و سپس توسط اندازه گیری های واقعی اعتبار سنجی شده است دراین مقاله آورده شده اند. دقت هر دو روش تحلیلی و تکنیک های اندازه گیری از نظر حداقل بازه تداخل برای عملکرد مناسب تجهیزات بحث می گردد.

Download link:

The Calculation And Verification Of Torsional Natural Frequencies For Turbomachinery Equipment Strings
حجم: 160 کیلوبایت

 

The jet engine core

CFD Analysis of Flow through Compressor Cascade

CFD Analysis of Flow through Compressor Cascade

Abstract— This work aims at analyzing the flow behavior through a compressor cascade with the help of Computational Fluid Dynamics using the FLUENT software. An attempt has been made to study the effect of angle of attack or flow incidence angle on various flow parameters viz. static pressure, dynamic pressure, turbulence and their distribution in the flow field and predict the optimum range of angle of attack based on the above observations. Particularly, two principle parameters viz. the static pressure rise for the compressor cascade and the turbulence kinetic energy are considered in this analysis. It is observed that maintaining a slightly positive angle of flow incidence of +2 to +6 degrees is advantageous.

Download Link:

CFD Analysis of Flow through Compressor Cascade
حجم: 1.36 مگابایت

CFD Simulation of Centrifugal Pump Impeller Using ANSYS-CFX

CFD Simulation of Centrifugal Pump Impeller Using 

ANSYS-CFX

ABSTRACT: Centrifugal pumps are a most commonly used in different fields like industries, agriculture and domestic applications. Computational Fluid Dynamics is most commonly used tool for simulation and analysis. 3-D numerical CFD tool is used for simulation of the flow field characteristics inside the turbo machinery. CFD simulation makes it possible to visualize the flow condition inside centrifugal pump. The present paper describes the head, power, efficiency and to evaluate the pump performance using the ANSYS CFX-14, a computational fluid dynamics simulation tool. These simulations of centrifugal pumps are strongly related to cavitation flow phenomena, which may occur in either the rotating runner-impeller or the stationary parts of the centrifugal pumps. The numerical simulation can be used to detect the cavitation in centrifugal pump and to get safe range of operating at different flow rate and rotating speed.

KEYWORDS: Centrifugal pump impeller, CFD, Head, Power, Efficiency, Cavitation.

Download Link: 

CFD Simulation of Centrifugal Pump Impeller
Size: 1.2 MB